Configuring The Intermec Gateway To Automatically Start - Intermec CN2B User Manual

Chapter 4 — Using the Intermec Gateway in a TCP/IP Client/Server Environment
Configuring the Intermec Gateway to Automatically
Start
82
You can configure the Intermec Application Server to
automatically start the Intermec Gateway and its related
processes each time the Intermec Application Server is rebooted.
You must start the Intermec Gateway before you can
communicate with your UDP Plus and WTP devices.
To automatically start the Intermec Gateway
1 From the Intermec Application Server home page, click
Management. The Intermec Application Server Management
page appears.
2 In the Intermec Gateway row, check Autostart. A message
box appears confirming that you want to automatically start
the Intermec Gateway each time the Intermec Application
Server starts.
3 Click OK.
Note: You can turn this feature off at anytime by clearing the
Autostart check box. You can also use this page to start or stop
the Intermec Gateway at any time.
Intermec Gateway User's Guide