Configuring the Data Collection Devices for Native TE
Intermec Gateway User's Guide
Chapter 2 — Using the Intermec Gateway in a Native Environment
3 Click Save and Reboot. A message box appears confirming
that you want to reboot the Intermec Application Server.
4 Click OK. The Intermec Application Server reboots, and
your changes take effect.
UDP Plus data collection devices can communicate with Native
hosts through the Intermec Gateway if they have a supported
TE client loaded on them.
The next table identifies the files that must be loaded on each
device before the device can run Native TE.
Files Required for Native TE
Device
Trakker Antares terminal (2415,
2425, 2435, 2455, 2475, 248X)
Trakker Antares terminal (2415,
2425, 2435, 2455, 2475, 248X)
5020
1100, 1700, 5055, 5900, 6400
CK30, CK31
Protocol
Application
UDP Plus
dcBrowser Client
WTP
TE 2000
UDP Plus
dcBrowser Client
WTP
TE 2000
UDP Plus
dcBrowser Client
41