Saving And Activating Changes - Intermec CN2B User Manual

Saving and Activating Changes

Intermec Gateway User's Guide
Chapter 3 — Using the Intermec Gateway in a dcBrowser Environment
2 Check the Autostart check box in both the Intermec
Gateway row and the dcBrowser Gateway row. A message
box appears, confirming that you want to automatically start
the gateways each time the Intermec Application Server starts.
3 Click OK.
4 Continue to the next section, "Saving and Activating
Changes."
Note: You can turn off this feature at any time by clearing the
Autostart check boxes. You can also use this page to start or stop
either gateway at any time.
Before any of the changes you have made will take effect on the
Intermec Gateway, you need to save and activate your changes.
Saving and activating your changes involves rebooting the
Intermec Application Server.
To save and activate your changes
1 From the Intermec Gateway home page, click
Configuration. If a security screen appears, type
in the User Name field and
administrator
the Password field, and click OK. You must type
in lowercase.
in
intermec
intermec
67