Configuring Wtp - Intermec CN2B User Manual

Chapter 4 — Using the Intermec Gateway in a TCP/IP Client/Server Environment

Configuring WTP

Intermec Gateway User's Guide
As described in "Determining the Maximum Number of
Sessions Supported" on page 71, the Intermec Gateway supports
up to 127 simultaneous WTP connections.
This section provides an overview for configuring the WTP
network. For detailed instructions, see the online help.
To configure WTP
1 From the Intermec Gateway home page, click
Configuration. If a security screen appears, type
in the User Name field and
administrator
the Password field, and click OK. You must type
in lowercase.
2 In the configuration menu tree, expand the Downline
Network submenu.
3 Click WTP to configure the WTP parameters. The WTP
Configuration page appears.
4 Enter an RF Host Name, and click Submit Changes.
Note: If you are connecting an 1100, 1700, or 6400 to this
host, the RF host name must be in all uppercase letters.
in
intermec
intermec
81