Setting Up The Udp Plus Devices - Intermec CN2B User Manual

Setting Up the UDP Plus Devices

Intermec Gateway User's Guide
Chapter 1 — Using the Intermec Gateway in a Telnet Environment
Files Required for Telnet TE
Device Protocol
Trakker Antares UDP Plus
terminal
(2415, 2425,
2435, 2455,
2475, 248X)
Trakker Antares WTP
terminal
(2415, 2425,
2435, 2455,
2475, 248X)
5020 UDP Plus
1100, 1700, WTP
5055, 5900,
6400
CK30, CK31 UDP Plus
CN3 UDP Plus
CV30 UDP Plus
CV60 UDP Plus
(XP only)
730 UDP Plus
Trakker Antares UDP Plus terminals, 5020 UDP Plus devices,
CK30, CK31, CN3, CV30, CV60 XP, and 730 computers can
communicate to the Telnet host through the Intermec Gateway
if they have a Telnet terminal emulation (TE) client loaded on
them. The Trakker Antares terminals, 5020 devices, CK30,
CK31, CN3, CV30, CV60 XP, and 730 computers may already
have the TE 2000 application loaded on them.
Application Files
TE 2000 FWP240H0.BIN,
CFGLIT.DAT
VTXX, ANSI VTXXX_D.BIN
TN5250 POLX5250.MAP,
PLX5250.BIN
TN3270 POLX3270.MAP,
PLX3270.BIN
TE 2000 FWP240H0.BIN,
CFGLIT.DAT
TE 2000 Pre-loaded
TE 2000 Pre-loaded
VT220
TN5250
TN3270
TE 2000 Pre-loaded
TE 2000 te_cn3.cab
TE 2000 te_cv30.cab
TE 2000 Pre-loaded
TE 2000 Pre-loaded
17