Configuring The Intermec Gateway To Automatically Start - Intermec CN2B User Manual

Chapter 1 — Using the Intermec Gateway in a Telnet Environment
Configuring the Intermec Gateway to Automatically
Start
14
7 Select the Default Telnet Host Link from the list, and then
click Submit Changes. A success message appears.
Note: If you want certain devices to connect to a specific
host, you need to set the host in your device list. See the
online help for more information.
You can configure the Intermec Application Server to
automatically start the Intermec Gateway and its related
processes each time the Intermec Application Server is rebooted.
You must start the Intermec Gateway before you can
communicate with your UDP Plus and WTP devices.
To automatically start the Intermec Gateway
1 From the Intermec Application Server home page, click
Management. The Intermec Application Server Management
page appears.
Intermec Gateway User's Guide