Configuring Udp Plus - Intermec CN2B User Manual

Chapter 2 — Using the Intermec Gateway in a Native Environment

Configuring UDP Plus

34
Then, you must start the Intermec Gateway and its related
processes. For help connecting the Intermec Application Server,
see the Intermec Application Server User's Guide.
As described in "Determining the Maximum Number of
Sessions Supported" on page 25, the Intermec Gateway supports
up to 300 simultaneous UDP Plus connections. You can
configure more than 300 devices, but only the first 300
attempting to connect may be allowed to connect.
This section provides an overview for configuring the UDP Plus
network. For detailed instructions, see the online help.
To configure UDP Plus
1 From the Intermec Gateway home page, click
Configuration. If a security screen appears, type
in the User Name field and
administrator
the Password field, and click OK. You must type
in lowercase.
2 In the configuration menu tree, expand the Downline
Network submenu.
3 Click UDP Plus to configure the UDP Plus parameters. The
UDP Plus Configuration page appears.
intermec
intermec
Intermec Gateway User's Guide
in