Chapter 1 — Using the Intermec Gateway in a Telnet Environment
Configuring the Data Collection Devices for Telnet TE
16
3 Click Save and Reboot. A message box appears confirming
that you want to reboot the Intermec Application Server.
4 Click OK. The Intermec Application Server reboots, and
your changes take effect.
The data collection devices can communicate to IP hosts
through the Intermec Gateway if they have a supported Telnet
TE client loaded on them. The next table identifies the files that
must be loaded on each device before the device can run Telnet
TE.
Intermec Gateway User's Guide