Installing The Intermec Gateway Licenses; Installing The Dcbrowser Gateway Licenses; Opening The Intermec Gateway Home Page - Intermec CN2B User Manual

Installing the Intermec Gateway Licenses

Installing the dcBrowser Gateway Licenses

Opening the Intermec Gateway Home Page

Intermec Gateway User's Guide
Chapter 3 — Using the Intermec Gateway in a dcBrowser Environment
Before you can use your Intermec Gateway in the dcBrowser
environment, you need to purchase and install an Intermec
Gateway license for each session that will connect through the
Intermec Gateway. If a WTP device is configured to support
two sessions (for example, connecting to two hosts), that WTP
device will require two licenses.
For help installing the licenses, see the Intermec Gateway License
Instructions (P/N 072960) that shipped with the Intermec
Gateway license disk.
Note: Before you install the licenses, Intermec allows one device
to connect to the Intermec Gateway for development purposes
only.
If you intend to use the dcBrowser gateway with more than one
client terminal or device, you need to purchase a license for each
client. You will receive these licenses on a floppy disk. If you
already have 10 licenses and you order and install another 10,
you will have a total of 20 licenses.
For help installing licenses, see the "Placing the Licenses in the
Pak File" topic in the dcBrowser online help.
Note: Before you install the licenses, Intermec allows one device
to connect to the dcBrowser gateway for development purposes
only.
Before you can open the Intermec Gateway home page, you
need to install the Intermec Application Server and assign the IP
address. For help, see the Intermec Application Server User's
Guide (P/N 072242).
53