Configuring Wtp - Intermec CN2B User Manual

Configuring WTP

Intermec Gateway User's Guide
Chapter 2 — Using the Intermec Gateway in a Native Environment
11 Select Enable Device.
12 Enter an IP address or domain.
13 Click Submit Changes.
Note: The number that appears in the success message
indicates the row in the SQL database.
As described in "Determining the Maximum Number of
Sessions Supported" on page 25, the Intermec Gateway supports
up to 127 simultaneous WTP connections.
This section provides an overview for configuring the WTP
network. For detailed instructions, see the online help.
To configure WTP
1 From the Intermec Gateway home page, click
Configuration. If a security screen appears, type
administrator
the Password field, and click OK. You must type
in lowercase.
2 In the configuration menu tree, expand the Downline
Network submenu.
in the User Name field and in
intermec
intermec
37