Defining The Dcbrowser Gateway As A Host - Intermec CN2B User Manual
Intermec gateway
Hide thumbs
Also See for CN2B:
- User manual (256 pages) ,
- Instructions manual (28 pages) ,
- Supplementary manual (1 page)
Table of Contents
Advertisement
Chapter 3 — Using the Intermec Gateway in a dcBrowser Environment
Defining the dcBrowser Gateway as a Host
Configuration
menu
tree
56
This section provides an overview for defining the dcBrowser as
a host that the Intermec Gateway can connect to. For detailed
instructions, see the online help.
To define the dcBrowser gateway as a host
1 From the Intermec Gateway home page, click
Configuration. If a security screen appears, type
in the User Name field and
administrator
the Password field, and click OK. You must type
in lowercase.
2 In the configuration menu tree, expand the Upline Network
submenu.
3 Click IP Hosts. The IP Hosts page appears. This page lets
you configure the parameters for the IP hosts and their ports.
4 Click Add New Host. The Add New IP Host page appears.
intermec
intermec
Intermec Gateway User's Guide
in
Advertisement
Table of Contents
Troubleshooting
