7 Electrical connection
7.6 Preparing the power connection
X200
64
7.6
Preparing the power connection
General
NOTICE
The Heliodent Plus wall model is suitable for fixed installation only.
CAUTION
Observe the permissible nominal voltage range!
The unit can be connected to 120 V (1-phase connection) or to
200 - 240 V (1-phase or 2-phase connection). A pretransformer is
required
for all other voltages.
1-phase connection
➢ Attach the power cable to X200 on DX1.
Do not connect it due to initial test of protective ground wire and
device leakage current, see
● X200.1: L1 (phase 1)
● X200.2: N' (Do not use!)
● X200.3: N
● X200.4: PE
Dentsply Sirona
Installation Instructions Heliodent Plus
62 14 972 D 3507
D 3507.031.01.15.02 03.2018