Table of Contents
Advertisement
Dentsply Sirona
Installation Instructions Heliodent Plus
62 14 972 D 3507
D 3507.031.01.15.02 03.2018
Removing the EMC plate
7.4.2.1
✔
The EMC plate must be removed if the release button or the door
switch on X401 is to be connected to the DX1.
1. Unscrew the 3 screws from the EMC plate and suspend the EMC
plate at the side.
2. In the case of cable L3 (spiral cable): Place the ferrite core of the
spiral cable inside the EMC plate.
3. Screw the EMC plate back in securely after connecting the release
button or the door switch.
7 Electrical connection
7.4 Connecting the release and the door contact
45
Advertisement
Table of Contents
