Attach The Emc Additional Plate For The Wall Adapter To The Power - Dentsply Sirona Heliodent Plus Installation Instructions Manual

Dentsply Sirona
Installation Instructions Heliodent Plus
62 14 972 D 3507
D 3507.031.01.15.02 03.2018
8.2.2 Attach the EMC additional plate for the wall adapter to the
power supply
✔
The safety checks are performed, the power cable is connected.
✔
Not required for ceiling model.
1. Place the EMC additional plate on the EMC plate.
2. Screw the EMC additional plate on the EMC plate using 2 screws (A).
3. Screw the EMC additional plate onto the spacing bolt using screw (B).
A
L1
B
N´
N
PE
8 Starting up
8.2 Attaching the housing covers
75