Table of Contents
Advertisement
Dry, well ventilated and dust-free installation location.
Keep the distance to the batteries as short as possible to achieve short cable lengths.
Do not install the device directly next to or above the batteries.
The device must be protected from the effect of dust and humidity.
Make sure that the fan can intake cooling air freely.
Do not install the device directly next to or above inflammable materials.
4.3
Device installation
Install the device on a level horizontal or vertical surface. The four recesses on the rubber feet are for
attachment. Use screws with a diameter of 5 mm.
The built-in fan guarantees optimum cooling independently of the direction of
installation.
Dimensional drawings can be found in section 3.2.
Vertical installation option
Fig. 5 Attachment CPC
Page - 18 -
All manuals and user guides at all-guides.com
LEAB Automotive -CPC
LEAB Automotive GmbH
Attachment screws 5
mm
Advertisement
Table of Contents
