Connection Of Sensor Cable; Connection Of Cbl Control Relay (600/800W Only) - LEAB 600W Series User Manual

4.7

Connection of sensor cable

There is also two sensor cables optionally available from LEAB for connection to the RJ45 jack on the
back of the device (refer also to the drawing in section 4.1).
CTS cable: Sensor for temperature and voltage
This sensor cable is used to measure the temperature in the battery
environment as well as the voltage directly at the battery terminal,
and then transmit this to the CPC battery charger. The CPC corrects
the charging voltage depending on the temperature, in order to
achieve optimum efficiency and yet gentle battery charging at all
times, no matter the temperature. By measuring the voltage at the
battery terminals, the CPC can compensate the drop in voltage on the
charging cable, thus making faster and more efficient charging
possible even with long charging cables.
We recommend the use of the combined CTS sensor cable where
charging cables longer than 3 m are used.
TS cable: Sensor for temperature
This sensor cable can be used to measure the temperature in the direct
environment of the battery and transmit this to the CPC battery
charger. The CPC corrects the charging voltage depending on the
temperature, in order to achieve optimum efficiency and yet gentle
battery charging at all times, no matter the temperature.
We recommend the use of the TS temperature sensor cable where
charging cables up to 3 m in length are used. Available versions can be
found under "Accessories" in section 2.7.
4.8

Connection of CBL control relay (600/800W only)

There is a potential-free changeover contact installed in the battery
charger versions of the LEAB CPC series 600W and 800W which
switches during charging operation. There is a suitable adapter cable
set with RJ45 connector and three open cable ends available for more
straightforward connection.
This option can be used for example as an electrical ignition interlock
for a 230 V connection or for charging monitoring.
Fig. 7 Connection assignment and technical data for switched output CBL
All manuals and user guides at all-guides.com
LEAB Automotive -CPC
LEAB Automotive GmbH
Page - 21 -