Connection Of Remote Display - LEAB 600W Series User Manual

If you require a longer mains connection cable or one with a plug other than the 250 V/16 A Schuko plug
delivered with the device as standard, please contact LEAB or your specialist dealer. We can make
customised connection cables for you at a favourable price. We expressly advise against modifying the
connection cable yourself, fitting other plugs or making new cables.
The respective national guidelines (e.g. VDE, DIN in Germany) or guidelines from the associations
responsible (accident prevention regulations for example) must be followed when connecting the device
to an existing 230 V installation. This work may only be carried out by an appropriately trained
electrician. The LEAB CPC corresponds to protection class I and requires a protective earth conductor to
be connected. For permanent installation we recommend a cable cross-section of 3x 1.5 mm².
4.6

Connection of remote display

Fig. 6 Remote display with connection cable
Page - 20 -
All manuals and user guides at all-guides.com
LEAB Automotive -CPC
There is also an LED remote display optionally available from
LEAB for connection to the RJ45 jack on the back of the
device (refer also to the drawing in section 4.1). This remote
display can be used to display the status of the built-in LED,
providing an additional display of the status of charge and
charging parameters for a permanently installed battery
charger.
Refer to section 2.5 for details of the display and appearance
of different LED states.
Article number and type for the remote display can be found
in the spare parts and accessories list in section 2.7 of this
manual.
LEAB Automotive GmbH