Related Manuals for LEAB CHAMP 12 V
Summary of Contents for LEAB CHAMP 12 V
- Page 1 CHARGER CHAMP 12 V USER MANUAL VERSION 5 13/07/2021 www.leab.eu LEAB Automotive GmbH Thorshammer 6 24866 Busdorf...
-
Page 2: Table Of Contents
Table of contents LEAB Automotive GmbH Table of contents 1 About this Manual ........................ 2 Safety ............................Intended Use....................... Foreseeable Misuse....................3 About this product ....................... 4 Technical specifications..................... 5 Package contents........................16 6 Charging characteristic....................... 16 7 Assembly ..........................18 8 Installation .......................... -
Page 3: About This Manual
Skilled workers in the field of automotive electrics. Any modifications to the product or its components are prohibited and do not conform to its intended use. Only use original LEAB or LEAB-approved ac- cessories. Throughout the manual, you will be alerted to warnings and safety notices about potential hazards associated with handling the device. -
Page 4: Safety
2 Safety LEAB Automotive GmbH DANGER Danger that will lead to severe injury or death Safety instructions with the signal word Danger indicate a hazard which, if not avoided, will result in death or severe injury. Read the safety instructions carefully and follow them to avoid the hazard. - Page 5 LEAB Automotive GmbH 2 Safety WARNING Risk of fire from overheated battery Flammable gases can escape if the battery overheats. 1. Always charge batteries in well-ventilated rooms and away from ignition sources. WARNING Risk of injury from damaged, frozen or deformed batteries Damaged, frozen or deformed batteries can cause injuries.
-
Page 6: Foreseeable Misuse
Never pinch the leads of the charger to avoid damage. In the event of damage, unplug the charger immediately and contact your dealer or LEAB. 3 About this product The Champ charger is a trickle and battery charger designed for permanent in- stallation in vehicles. -
Page 7: Technical Specifications
LEAB Automotive GmbH 4 Technical specifications 4 Technical specifications Part no. Part no. Part no. 0101033810 0101033811 0101033813 Modell Champ 1217 Champ 1217 Champ 1217 Battery type Lead (gel/AGM) Lead (wet) Lead (gel/AGM) Battery capacity 55 Ah ... 170 Ah 55 Ah ... - Page 8 4 Technical specifications LEAB Automotive GmbH Part no. Part no. Part no. 0101033810 0101033811 0101033813 Operating temper- -30 °C ... +70 °C -30 °C ... +70 °C -30 °C ... +70 °C ature Protection class Dimensions (L x W 98 mm x 192 mm x...
- Page 9 LEAB Automotive GmbH 4 Technical specifications Part no. Part no. Part no. 0101033819 0101933826 0101033820 AC cable 0.2 m; DEFA 1.5 m, two-pin 0.2 m; DEFA earthed plug DC cable 1.5 m, ring ter- 1.5 m, open 1.5 m, ring ter-...
- Page 10 4 Technical specifications LEAB Automotive GmbH Part no. Part no. Part no. 0101033825 0101033826 0101033828 Degree of effi- > 88 % > 88 % > 88 % ciency, max. Quiescent current < 2 mA < 2 mA < 2 mA...
- Page 11 LEAB Automotive GmbH 4 Technical specifications Part no. Part no. Part no. 0101033829 0101033830 0101933825 Input voltage 230 V 230 V 230 V Input values 190 V ... 270 V 190 V ... 270 V 190 V ... 270 V Input frequency 40 Hz ...
- Page 12 4 Technical specifications LEAB Automotive GmbH Part no. Part no. Part no. 0101033315 0101033316 0101033318 Charging charac- IU1U2 pre-pro- IU1U2 pre-pro- IU1U2 pre-pro- teristics grammed, cannot grammed, cannot grammed, cannot be changed be changed be changed Charging current Ripple < 3 % <...
- Page 13 LEAB Automotive GmbH 4 Technical specifications Part no. Part no. Part no. 0101033326 0101033330 0101033331 Modell Champ 1207 Champ 1207 Champ 1207 Battery type Lead (gel/AGM) Lead (gel/AGM) Lead (wet) Battery capacity 55 Ah ... 170 Ah 55 Ah ... 170 Ah 55 Ah ...
- Page 14 4 Technical specifications LEAB Automotive GmbH Part no. Part no. Part no. 0101033326 0101033330 0101033331 Dimensions (L x W 80 mm x 155 mm x 80 mm x 155 mm x 80 mm x 155 mm x x H) 43 mm...
- Page 15 LEAB Automotive GmbH 4 Technical specifications Part no. Part no. Part no. 0101033332 0101033333 0101033334 International Pro- IP67 IP67 IP67 tection (IP class) Operating temper- -30 °C ... +85 °C -30 °C ... +85 °C -30 °C ... +85 °C...
-
Page 16: Package Contents
6 Charging characteristic LEAB Automotive GmbH Part no. Part no. Part no. Part no. 0101033335 0101035001 0101933331 0101935001 Degree of effi- > 88 % > 88 % > 88 % > 88 % ciency, max. Quiescent cur- < 2 mA <... - Page 17 LEAB Automotive GmbH 6 Charging characteristic Fig. 2: IU1U2 charging characteristic I phase: Charging with constant current Depending on the battery charge state, the battery is charged with maximum charging current to store as much energy as possible in the battery. After...
-
Page 18: Assembly
8 Installation LEAB Automotive GmbH Battery Type Charge voltage AGM battery 12 V 13.8 V 7 Assembly To assemble the device, proceed as follows: ü Choose a cool, dry and well-ventilated assembly site. ü Do not mount the device directly next to or above batteries. -
Page 19: Connection To The 230 V Mains Supply
LEAB Automotive GmbH 9 Operation NOTE! Connect the cable lug directly to the negative terminal of the battery. 5. Connect the vehicle battery to the vehicle power circuit. ð The device is installed. 8.2 Connection to the 230 V mains supply To connect the device to the 230 V mains, proceed as follows: NOTE! The charger is only suitable for connection to fused, earthed 230 V... -
Page 20: Charging The Battery
9 Operation LEAB Automotive GmbH 9.2 Charging the battery To unpack the device, proceed as follows: ü The device is installed. ü The battery is connected. 1. Connect the mains plug to a 230 V mains supply. ð Charging starts automatically, the yellow LED of the charge status indic- ator lights up. -
Page 21: Maintenance
LEAB Automotive GmbH 12 EU Declaration of Conformity 10 Maintenance Check the device as follows before using it each time: – Check the mains cable and mains plug for damage. – Check charging cables and connections for damage. – Check the charger for external damage. -
Page 22: Appendix
13 Appendix LEAB Automotive GmbH 13 Appendix 13.1 Information on outdoor use of the PowerSystem 12/24 V MagCode PowerSystems were originally developed for vehicle interiors. How- ever, in Germany, the BGS, DRK, fire brigade, police and THW now use these systems in addition to the DIN plug as an outdoor socket for charge mainten- ance on their emergency vehicles. -
Page 23: Magcodepowerport Installation Instructions
LEAB Automotive GmbH 13 Appendix 13.2 MagCodePowerPort installation instructions NOTE! An existing car socket can easily be replaced by a MagCode PowerPort, as both have the same diameter. If installing elsewhere, we recommend visiting a specialist workshop. To install the MagCode PowerPort in place of an existing Fig. 3: MagCode... - Page 24 13 Appendix LEAB Automotive GmbH 5. Screw the cables into the terminals. NOTE! Note the polarity of the wires. 6. Screw the housing together. ð The device is assembled. LEAB Automotive GmbH Thorshammer 6 24866 Busdorf...
- Page 25 LEAB Automotive GmbH 13 Appendix LEAB Automotive GmbH Thorshammer 6 24866 Busdorf...
- Page 26 13 Appendix LEAB Automotive GmbH LEAB Automotive GmbH Thorshammer 6 24866 Busdorf...
- Page 27 LEAB Automotive GmbH 13 Appendix LEAB Automotive GmbH Thorshammer 6 24866 Busdorf...
- Page 28 Tel: +49 (0) 4621 9 78 60-0 Fax: +49 (0) 4621 9 78 60-260 info@leab.eu It is prohibited to copy, duplicate, translate or otherwise pass on the content of this guide to third parties without the express written permission of LEAB.