Installation instructions
8
Installation
The Champ is a battery charger for permanent installation in vehicles.
NOTICE
Defects from incorrect installation
The negative lead of the device may include a temperature sensor.
Never shorten or extend the negative cable with a temperature
sensor.
To install the charger in the vehicle, perform the following steps:
1.
Disconnect the battery from the vehicle power circuit.
Warning: Disconnect the negative cable first.
2.
Secure the positive cable of the device as close as
possible to the vehicle battery with a suitable fuse.
3.
Connect the positive cable of the device to the
positive terminal of the battery.
4.
Connect the negative cable of the device to the
negative terminal of the battery.
Connect the cable lug directly to the negative terminal of the
battery.
5.
Connect the vehicle battery to the vehicle power circuit.
The device is installed.
Page 15 of 18
Installation
–
+