Mounting; Installation - LEAB ABC 1215 User Manual

Installation Instructions
8

Mounting

To mount the device, perform the following steps:
 Choose a cool, dry and well-ventilated mounting site.
 Do not mount the device directly next to or above batteries.
 To allow adequate cooling, ensure an unimpeded supply of
cooling air.
1. Fasten the mounting plate to the 4 lateral holes (5 mm Ø).
2. Push the device onto the mounting plate.
The device is mounted.
9

Installation

Connecting the Battery
To install the battery, perform the following steps:
1. Disconnect the battery from the vehicle power circuit.
Warning: Disconnect the negative cable first.
2. Secure the positive cable of the device as close as possible to the vehicle
battery with a suitable fuse (60 A).
3. Connect the positive cable of the device to the positive terminal of the
battery.
4. Connect the negative cable of the device to the negative terminal of the
battery.
5. Connect the vehicle battery to the vehicle power circuit again.
The battery is connected.
Page 13 of 18
Mounting