Instructions For Use - Otto Bock 4R104 60 Instructions For Use Manual

Unacceptable environmental conditions
Chemicals/liquids: fresh water, salt water, perspiration, urine,
acids, soapsuds, chlorine water
Solids: dust, sand, highly hygroscopic particles (e. g. talcum)
2.4 Lifetime
This product was tested by the manufacturer with 3 million load
cycles. Depending on the user's activity level, this corresponds to a
maximum lifetime of 5 years.
3 Safety
3.1 Explanation of warning symbols
Warning regarding possible risks of accident or
CAUTION
injury.
3.2 General safety instructions
CAUTION!
Risk of injury and risk of product damage
► Note the combination possibilities/combination exclusions in the
instructions for use of the products.
► Comply with the product's field of application and do not expose
it to excessive strain (see page 7).
► Do not expose the product to prohibited environmental condi­
tions.
► Check the product for damage if it has been exposed to prohib­
ited environmental conditions.
► Do not use the product if it is damaged or in a questionable con­
dition. Take suitable measures (e.g. cleaning, repair, replace­
ment, inspection by the manufacturer or a specialist workshop).
► To avoid the risk of injury and product damage, do not use the
product beyond the tested lifetime.
8
► To avoid the risk of injury and product damage, only use the
product for a single patient.
► To prevent mechanical damage, use caution when working with
the product.
► If you suspect the product is damaged, check it for proper func­
tion and readiness for use.
► Do not use the product if its functionality is restricted. Take suit­
able measures (e.g. cleaning, repair, replacement, inspection by
the manufacturer or a specialist workshop).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an
altered gait pattern, a change in the positioning of the prosthetic com­
ponents relative to each other and by the development of noises.
4 Scope of delivery
Quantity Designation
1

Instructions for use

1 Double adapter, sliding
Pre-assembled:
8 Set screw
1 Set screw
2 Cap screw
5 Preparing the product for use
CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
Reference number
–
–
506G3=M8x16
506G3=M5x8
501Z16