Possible Value; Parser: Textparser; Valid For Command: Add, Audit, Change, Delete, Show, Sync; Mandatory: Add, Change, Delete - Cisco BTS 10200 Softswitch Manual

Automatic Number Identification/Dialed Number Identification Service Manipulation
ID
LIMIT
MASTER
MAX_DIGITS
MIN_DIGITS
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-52
Description: Primary key. Foreign key: International Dial Plan Profile table.
International dial plan profile ID.
VARCHAR(16): 1-16 ASCII characters.

Valid for Command: add, audit, change, delete, show, sync

Mandatory: add, change, delete

Possible Value: [1_16]

Parser: TextParser

Description: Specifies the number of rows to display on the screen. Valid
only for the show command.
INTEGER: 1-100000000 (Default = 100000000).
Valid for Command: show
Default Value: 100000000
Possible Value: [1_100000000]
Parser: DecimalParser
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]
Parser: TextParser
Description: Maximum number of digits allowed. Maximum number of
digits for any phone number in the country being added.
SMALLINT: 3-64 (Default = 16).
Valid for Command: add, change, audit, sync, show
Default Value: 16
Possible Value: [3_64]
Parser: DecimalParser
Description: Minimum number of digits required for a call to this country.
Minimum number of digits for any phone number in the country being
added.
SMALLINT: 3-64 (Default = 6).
Valid for Command: add, change, audit, sync, show
Default Value: 6
Possible Value: [3_64]
Parser: DecimalParser
Chapter 1 Digit Translations
OL-8001-10