Possible Value; Parser: Textparser; Policy Prefix - Cisco BTS 10200 Softswitch Manual

Chapter 2 Routing
START_ROW
TARGET

Policy Prefix

The Policy Prefix enables the flexible routing of calls via the Cisco BTS 10200 Softswitch based on
prefix (type of call). Typical call types include 1+ dialing, international calls, toll-free, and so on. The
Policy Prefix is used mainly for carrier routing.
Table Name: POLICY_PREFIX
Table Containment Area: EMS, CA, FSAIN
Command Types add, audit, change, delete, help, show, sync
Sync is a restricted command and is intended for repairing data only. Improper use may corrupt database
Caution
and disrupt call processing. Use with caution.
Examples
show policy-prefix id=standard;
add policy-prefix id=standard; prefix1=national; policy-type1=tod; policy-id1=tod01;
change policy-prefix id=standard; prefix2=da; policy-type=tod; policy-id=tod99;
delete policy-prefix id=standard;
OL-8001-10
Description: Specifies to begin displaying data on the screen at a specific
row. Valid only for the show command.
INTEGER: 1-100000000 (Default = 1).
Valid for Command: show
Default Value: 1

Possible Value: [1_100000000]

Parser: DecimalParser
Description: Specifies the network element to receive the request.
VARCHAR(5): 1-5 ASCII characters. Permitted values are:
CA—Network identifier of a Call Agent.
FSPTC (POTS/Tandem/Centrex Feature Server)—Network identifier of a
specific Feature Server.
FSAIN (AIN Feature Server)—Network identifier of AIN Feature Servers.
Valid for Command: sync
Mandatory: sync
Possible Value: [1_10]

Parser: TextParser

Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
Policy Based Flexible Routing
2-83