In Dn2Sub; Lnp Local Sub - Cisco BTS 10200 Softswitch Manual

Chapter 4 Command Line Interface Routing

In DN2Sub

The In DN2Sub CLI example is used in the
In DN2Sub Example:
CLI>show office-code digit-string=214-387
Reply : Success: Entry 1 of 1 returned.
DIGIT_STRING=214387
OFFICE_CODE_INDEX=657
DID=N
CALL_AGENT_ID=CA552
DIALABLE=Y
NDC=214
EC=387
DN_GROUP=xxxx
CLI>show dn2subscriber OFFICE_CODE_INDEX=657;dn=1000
Reply : Success: Entry 1 of 1 returned.
OFFICE_CODE_INDEX=657
DN=1000
STATUS=ASSIGNED
RING_TYPE=1
LNP_TRIGGER=N
NP_RESERVED=N
SUB_ID=test1

LNP Local Sub

The LNP Local Sub CLI example is used in the
LNP Local Sub Example:
CLI>show dial-plan id=dp50;digit-string=214-387
Reply : Success: Entry 1 of 1 returned.
ID=dp50
DIGIT_STRING=214387
DEST_ID=local-sub
SPLIT_NPA=NONE
MIN_DIGITS=10
MAX_DIGITS=10
NOA=NATIONAL
CLI>show destination dest-id=local-sub
Reply : Success: Entry 1 of 1 returned.
DEST_ID=local-sub
CALL_TYPE=LOCAL
ROUTE_TYPE=SUB
ZERO_PLUS=N
INTRA_STATE=Y
GAP_ROUTING=N
OL-8001-10
Command Line Interface Routing Examples
Ported-In Call Processing
Ported-In Call Processing
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
routing examples.
routing examples.
4-31