Operator Services; Prerequisites; Supported Interfaces - Cisco BTS 10200 Softswitch Manual

Chapter 2 Routing

Operator Services

The Operator Services feature allows routing of operator calls to a Feature Group D Operator Trunk
(FGD OS) using the CAS MF Operator Package (MO). The following operator calls are included:
•
•
•
•
•
•
•
•
The operator call is routed to a CAS MO trunk group by sending the called number followed by
information digits (I or II) and the calling number (ANI). All these digits are outpulsed to the CAS MO
trunk group using multifrequency (MF) signaling. The information digits and ANI can be delivered in
any one of these formats (configurable on a per terminating trunk basis):
•
•
•
•

Prerequisites

The Dial Plan table must be provisioned with a dial plan for operator calls.
An operator CAS MO terminating trunk group must be provisioned.

Supported Interfaces

Table 2-6
Table 2-6
RGW
origination
CAS
origination
SS7 origination
ISDN
origination
SIP origination
OL-8001-10
0-
0+
00
01+CC+NN
10XXXXX + 0-
10XXXXX + 0+
10XXXXX + 00
10XXXXX + 01+CC+NN
I + 7 digit ANI
I + 10 digit ANI
II + 7 digit ANI
II + 10 digit ANI
shows the interface support between call origination and termination.
Operator Services Supported Interfaces
RGW
termination
CAS SS7
termination termination
X
X
X
X
X
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
Call Types
ISDN
termination SIP termination
2-37