Dp50 Digit-String = 202; Ea-Use = Y - Cisco BTS 10200 Softswitch Manual

Command Line Interface Routing Examples

Dp50 Digit-String = 202

The Dp50 Digit-String = 202 CLI example is used in the
Dp50 Digit-String = 202 Example:
CLI>show dial-plan id=dp50; digit-string=202;
Reply : Success: Entry 1 of 1 returned.
ID=dp50
DIGIT_STRING=202
REQD_DIGITS=10
DEST_ID=interlata
SPLIT_NPA=NONE
MIN_DIGITS=10
MAX_DIGITS=10
NOA=NATIONAL
CLI>show destination dest-id=interlata
Reply : Success: Entry 1 of 1 returned.
DEST_ID=interlata
CALL_TYPE=INTERLATA
ROUTE_TYPE=ROUTE
ROUTE_GUIDE_ID=test
ZERO_PLUS=N
INTRA_STATE=Y
GAP_ROUTING=N

Ea-Use = Y

The Ea-Use = Y CLI example is used in the
Ea-Use = Y Example:
CLI>show sub-profile id=sp50
Reply : Success: Entry 1 of 1 returned.
ID=sp50
DIAL_PLAN_ID=dp50
LOCAL_PFX1_OPT=NR
TOLL_PFX1_OPT=RQ
POP_ID=50
OLI=0
EA_USE_PIC1=Y
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
4-30
Chapter 4
1+ Interlata Call
0+ Interlata Call routing example.
Command Line Interface Routing
routing example.
OL-8001-10