Carrier Use Dial-Plan "Y"; Destination; Destination Carrier - Cisco BTS 10200 Softswitch Manual

Chapter 4 Command Line Interface Routing

Carrier Use Dial-Plan "Y"

The Carrier Use Dial-Plan "Y" CLI example is used in the
Carrier Use Dial-Plan "Y" Example:
CLI>show carrier id=8888
Reply : Success: Entry 1 of 1 returned.
ID=8888
STATUS=INS
INTER=Y
INTRA=N
INTL=N
CASUAL=Y
CUT_THRU=Y
OP_SERVICES=Y
SEND_CN=N
SEND_CSP=N
USE_DIAL_PLAN=Y
DESCRIPTION=TEST
NETWORK_TYPE=NOTUSED
NATIONAL_NETWORK_PLAN=NOTUSED

Destination

The Destination CLI example is used in the
Routing
Destination Example:
CLI>show destination
DEST_ID=local-sub
CALL_TYPE=LOCAL
ROUTE_TYPE=SUB
ZERO_PLUS=N
INTRA_STATE=Y
GAP_ROUTING=N

Destination Carrier

The Destination Carrier CLI example is used in the
Destination Carrier Example:
CLI>show destination dest-id=800;
Reply : Success: Entry 1 of 1 returned.
DEST_ID=800
CALL_TYPE=TOLL_FREE
ROUTE_TYPE=CARRIER
CARRIER_ID=7777
ZERO_PLUS=N
INTRA_STATE=Y
GAP_ROUTING=N
OL-8001-10
routing examples.
Command Line Interface Routing Examples
Carrier Based Routing
Basic Subscriber Routingthe following
Basic Dial Plan Routing
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
routing example.
and Basic Trunk
routing example.
4-25