Chapter 6 Provisioning Dial Plan; International Dial Plan Profile; Custom Dial Plan - Cisco BTS 10200 Softswitch Manual

Provisioning a Dial Plan with the Command Line Interface
Dial Plan Profile
The Dial Plan Profile (dial-plan-profile) table creates dial-plan-profile ids before they are assigned to
subscribers or trunk groups. The dial-plan-profile id links digit-string entries in the Dial Plan table
within a dial plan. Different dial-plan-profile ids are assigned to subscribers and trunk groups. A
dial-plan-id must be created in this table before entries can be added to the Dial Plan table. For additional
Dial Plan Profile information, refer to the
International Dial Plan
The International Dial Plan (intl-dial-plan) table holds international dial plan information for calls to
regions outside the North American Numbering Plan (NANP). It contains the country code, minimum
and maximum digits, the country name, and the route-grp-id. For additional International Dial Plan table
information, refer to the

International Dial Plan Profile

The International Dial Plan Profile (intl-dial-plan-profile) table is used to create unique IDs for
international dial plans. This ID must be created before provisioning the International Dial Plan table.
For additional International Dial Plan Profile table information, refer to the
Profile" section on page

Custom Dial Plan

The Custom Dial Plan (custom-dial-plan) table translates Centrex calls. If the result of a custom dial plan
(CDP) is a POTS access code, call processing uses the POTS Dial Plan table to translate the digits dialed
after the POTS access code. Speed call codes are provisioned in this table as nod=speed-call and
fname=SC1D (or SC2D). Screening does not apply to speed dialing.
Table Name: CUSTOM_DIAL_PLAN
Table Containment Area: EMS, FSPTC
Command Types
add, audit, change, delete, help, show, sync
Caution Sync is a restricted command and is intended for repairing data only. Improper use may corrupt database
and disrupt call processing. Use with caution.
Examples
show custom-dial-plan id=cisco plan; digit-string=4xx;
add custom-dial-plan id=cisco plan; digit-string=9; nod=pots-access;
cat-string=1111111111;
change custom-dial-plan id=cisco plan; digit-string=4xx; nod=vsc; fname=CFUA;
delete custom-dial-plan id=cisco plan; digit-string=*72;
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
6-2
"Dial Plan Profile" section on page
"International Dial Plan" section on page
1-42.
Chapter 6 Provisioning Dial Plans
1-37.
1-50.
"International Dial Plan
OL-8001-10