Destination Sub; Dial-Plan; Dial-Plan Ca-Config - Cisco BTS 10200 Softswitch Manual

Chapter 4 Command Line Interface Routing

Destination SUB

The Destination SUB CLI example is used in the
Destination SUB Example:
CLI>show destination dest-id=65019
Reply : Success: Entry 1 of 1 returned.
DEST_ID=65019
CALL_TYPE=LOCAL
ROUTE_TYPE=SUB
ZERO_PLUS=N
INTRA_STATE=Y
GAP_ROUTING=N

Dial-Plan

The Dial-Plan CLI example is used in the
Dial-Plan Example:
CLI>show dial-plan id=dp50;digit-string=312-454;
Reply : Success: Entry 1 of 1 returned.
ID=dp50
DIGIT_STRING=312454
REQD_DIGITS=10
DEST_ID=local-sub
SPLIT_NPA=NONE
MIN_DIGITS=10
MAX_DIGITS=10
NOA=NATIONAL

Dial-Plan Ca-Config

The Dial-Plan Ca-Config CLI example is used in the
Dial-Plan Ca-Config Example:
CLI>show dial-plan-profile id=dp51
Reply : Success: Entry 1 of 1 returned.
ID=dp51
INTL_DIAL_PLAN_ID=dp50
NANP_DIAL_PLAN=Y
CLI>show dial-plan-profile id=dp50
Reply : Success: Entry 1 of 1 returned.
ID=dp50
DESCRIPTION=dialing plan 1
NANP_DIAL_PLAN=Y
CLI>show ca-config TYPE=DEFAULT-INTL-DIAL-PLAN-ID;
Reply : Success: Entry 1 of 1 returned.
TYPE=DEFAULT-INTL-DIAL-PLAN-ID
DATATYPE=STRING
VALUE=DEFAULT
OL-8001-10
Command Line Interface Routing Examples
Basic Dial Plan Routing
Basic Trunk Routing routing example.
Basic Dial Plan Routing
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
routing example.
routing example.
4-27