Destination Interlata; Destination Rid; Destination Route - Cisco BTS 10200 Softswitch Manual

Command Line Interface Routing Examples

Destination Interlata

The Destination Interlata CLI example is used in the
Destination Interlata Example:
CLI>show destination dest-id=interlata
Reply : Success: Entry 1 of 1 returned.
DEST_ID=interlata
CALL_TYPE=INTERLATA
ROUTE_TYPE=ROUTE
ROUTE_GUIDE_ID=test
ZERO_PLUS=N
INTRA_STATE=Y
GAP_ROUTING=N

Destination RID

The Destination RID CLI example is used in the
Destination RID Example:
CLI>show destination dest-id=65019
Reply : Success: Entry 1 of 1 returned.
DEST_ID=65019
CALL_TYPE=LOCAL
ROUTE_TYPE=RID
ZERO_PLUS=N
INTRA_STATE=Y
ROUTE_ID=65019
GAP_ROUTING=N

Destination ROUTE

The Destination ROUTE CLI example is used in the
Destination ROUTE Example:
CLI>show destination dest-id=65019
Reply : Success: Entry 1 of 1 returned.
DEST_ID=65019
CALL_TYPE=LOCAL
ROUTE_TYPE=ROUTE
ROUTE_GUIDE_ID=local6561200
ZERO_PLUS=N
INTRA_STATE=Y
GAP_ROUTING=N
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
4-26
Chapter 4
1+ Interlata Call routing example.
Basic Dial Plan Routing routing example.
Basic Dial Plan Routing
Command Line Interface Routing
routing example.
OL-8001-10