Dial Plan Profile - Cisco BTS 10200 Softswitch Manual

Chapter 1 Digit Translations

Dial Plan Profile

The Dial Plan Profile (dial-plan-profile) table creates dial-plan-profile ids before they are assigned to
subscribers or trunk groups. The dial-plan-profile id links digit-string entries in the Dial Plan table
within a dial plan. Different dial-plan-profile ids are assigned to subscribers and trunk groups. A
dial-plan-id must be created in this table before entries can be added to the Dial Plan table.
It is critical to specify the correct NANP-DIAL-PLAN value. If the default Y value (North America) is
Note
used on an international switch (e.g., in Europe), then digman and dial-plan NOA matching and
replacing will not work correctly.
Table Name: DIAL_PLAN_PROFILE
Table Containment Area: EMS, CA
Command Types
add, audit, change, delete, help, show, sync
Caution Sync is a restricted command and is intended for repairing data only. Improper use may corrupt database
and disrupt call processing. Use with caution.
Examples
show dial-plan-profile id=business;
add dial-plan-profile id=business; description=dialing plan for new business users in
dallas;
change dial-plan-profile id=business; description=dialing plan for new business users in
northdallas;
delete dial-plan-profile id=business;
Usage Guidelines Primary Key Token(s): ID
Foreign Key Token(s): intl-dial-plan-id, dnis-digman-id, ani-digman-id, nat-dial-plan-id,
noa-route-profile-id
Change Rules: dial-plan-profile id must exist.
Delete Rules:
•
•
•
•
•
Syntax Description
OL-8001-10
ID does not exist in any dial-plan::id.
ID does not exist in any sub-profile::dial-plan-id.
ID does not exist in any pop::lnp-dp-id.
ID does not exist in any trunk-grp::dial-plan-id.
ID does not exist in any carrier::dial-plan-id.
Automatic Number Identification/Dialed Number Identification Service Manipulation
Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x
1-37