HYDRAULIC FILTRATION
Auxiliary Circuit Filter
Located on the return line near the oil cooler is a hydraulic oil filter. The filter is a "spin-on" type of filter that will need
replacement. Replace this filter element after 50 hours of break-in use and every 500 hours thereafter.
OPERATION
REPLACEMENT PARTS
•
®
HyDRAuLIC FILTRATION
bRAND NAME
• • • •
FORCE AMERICA
NAPA
ZINGA
SIOux AuTOMATION
PART NuMbER
® ® ® ®
Page # 69
FILTER SHOWN:
FORCE AMERICA
# F5068-10C
Sioux Automation
# HYDFAFSF510210
F5068-10C
1759
SE10
HyDFAFSF510210
READ complete manual CAREFULLY
BEFORE attempting operation.