SAC 3600 Series Operator's Manual page 28

CONTROLS
using the Up and Down arrows. Pressing Reset icon will reset the hour interval and begin the next count for
service on that item. Pressing the Red X icon will clear the notification message until the unit is started again. The
Home icon will return the screen to the Home screen (Figure 7).
From the Home screen (Figure 3), pressing the Auxiliary Pressure icon will display the Auxiliary Pressures screen
(Figure 13). This screen shows the pressures in the auxiliary gear pump circuits. Aux 1 Pressure corresponds to the
pump which controls the door up/down and conveyor in/out functions. Aux 2 Pressure corresponds to the pump
which runs the conveyor chain motor. Also shown on this screen are the Conveyor Speed and Hydraulic Oil
Temperature. Pressing the Home icon will return the display to the Home screen and pressing the Back to
Operation icon will return the display to the Operation screen.
From the Home screen, pressing Hour Meter icon will display the Hour Meter screen (Figure 14). This screen
shows Truck Total Run Time (engine running), Mixing Time (augers ON), and Discharge Time (conveyor ON). Oil
temperature is also shown on this screen. Hours cannot be reset by the operator. Pressing the Home icon will
return the display to the Home screen.
OPERATION
REPLACEMENT PARTS
Figure 13
Figure 14
READ complete manual CAREFULLY
Page # 28
Page | 9
BEFORE attempting operation.