SAC 3600 Series Operator's Manual page 27

CONTROLS
From the Inputs/Outputs Diagnostics screen (Figure 7), pressing the Service Intervals icon will bring up the Service
Intervals and Reminders screen (Figure 12).
This screen shows the hour intervals of adjusting the conveyor chain, changing the hydrostatic pump filters,
changing the hydraulic oil, changing the auxiliary filter(s), and changing the pump drive gear oil. It also shows how
many hours are remaining until each scheduled service. When a service interval is met, a message will appear to
the operator on the main operation screen notifying the operator that a service needs to be completed. When the
service is completed, the operator will need to navigate to this screen and choose the item that was completed by
OPERATION
REPLACEMENT PARTS
Figure 11
Figure 12
READ complete manual CAREFULLY
Page # 27
Page | 8
BEFORE attempting operation.