Table of Contents
Advertisement
VM900319 ELECTRICAL KIT
SENSOR MUST BE ADJUSTED
WHEN FILLING HYD TANK
REFER TO PRINT VM800206
INSTALL IN PORT
ON REAR OF HYD TANK
27
INSTALL IN PORT
ON REAR OF HYD TANK
12 PIN CONNECTOR
TO BE CAPPED IF NO
RAM SYSTEM IS INSTALLED
4 PORT JUNCTION BOX
WIRING DIAGRAM
MOTOR 2 SPEED
COIL
FRONT MOTOR
SPEED SENSOR
16
19
33
TO PUMP
2 COIL C1
13
TO PUMP 1
COIL C1
OPERATION
REPLACEMENT PARTS
28
29
2
4
REAR DOOR
PROX SENSOR
REAR MOTOR
SPEED SENSOR
MOTOR 2
SPEED COIL
FRONT MOTOR
SPEED SENSOR
16
26
19
13
31
20
10
34
8
TO FRONT MOTOR
SPEED SENSOR
REAR DOOR
PROX SENSOR
REAR MOTOR
SPEED SENSOR
HYDRO 2
PUMP CONTROL
AUX 2 PRESSURE/
CHARGE FILTER IND 2
HYDRO 2
CHARGE PRESSURE
HYDRO 1
CHARGE PRESSURE
AUX 1 PRESSURE/
CHARGE FILTER IND 1
HYDRO 1
PUMP CONTROL
12
10 8
Page # 51
34
TO REAR MOTOR
SPEED SENSOR
TO MOTOR 2 SPEED COIL
24
SENSOR TO BE MOUNTED
LH TOP SIDE OF REAR DOOR
NOTES:
1.
CABLES MUST BE INSTALLED IN 4 PORT JUNCTION
BOX IN THE NOTED POSITIONS TO OPERATE CORRECTLY.
HYDRO 2
SYSTEM PRESSURE
HYDRO 1
SYSTEM PRESSURE
25
NOTES:
1.
ATTACH CABLES TO THE 8 PORT JUNCTION BOX AS NOTED.
2.
CABLES MUST GO TO THE CORRECT PORTS FOR THE UNIT
TO FUNCTION PROPERLY.
3.
BLACK 2 PIN CONNECTORS GO TO PUMP CONTROL, GRAY
2 PIN CONNECTORS GO TO CHARGE FILTERS.
VM700229 GOES TO PLUG C1 ON THE HYDROS. PLUG PORT
C2 WITH PROVIDED JESDT062S, JESW2S, AND JES114017.
READ complete manual CAREFULLY
BEFORE attempting operation.
VM800205 AND VM800314
ARE INCLUDED IN VM900254
ONLY IF REAR DOOR IS PRESENT.
IF NO REAR DOOR, LEAVE PORT
J4 PLUGGED ON JUNCTION BOX.
REMOVE EXISTING BYPASS
INDICATOR FROM FILTER HEADS
AND REPLACE WITH VM700237
Advertisement
Table of Contents
