Customer Reference Information - SAC 3600 Series Operator's Manual

Always give your Dealer the Model Number and Serial Number of your Sioux Automation Center 3600 series mixer when or-
dering parts or requesting service or other information. Depending on the type of service, the Serial Numbers of individual
components and/or assemblies will be required. The Serial Number location required for servicing your mixer is shown in
Figure 1 and is located behind the discharge on the drivers side at the base of the mixer. For easy reference, please write this
information in the Customer Reference Information section that follows.
Figure 1 Serial Number Location

CuSTOMER REFERENCE INFORMATION

Model Number:________________________________
Dealer Name:____________________________________Dealer Phone:______________________
Scale Indicator Model Number:____________________
Scale Indicator Serial Number:____________________
Remote Scale Indicator Serial Number:______________
Other Main Components:_________________________
(e.g. Gearboxes, Hydraulic Motors, etc.)
OPERATION
REPLACEMENT PARTS
SERIAL NuMbER LOCATIONS
________________________________________________
Page # 5
Serial Number:____________________
READ complete manual CAREFULLY
BEFORE attempting operation.