SAC 3600 Series Operator's Manual page 47

ELECTRICAL
The hydraulic power supplied by the auxiliary pumps enters the aluminum block manifold and the propor-
tional work valve. The hydraulic flow is divided to the different circuits found on the machine (e.g. discharge
door, conveyor). The valves are controlled electronically from the control console located in the truck cab.
Auxiliary Circuit Filtration
Once hydraulic oil has circulated through the manifold valve
and the hydraulic cooler, it exits into a filter assembly locat-
ed near the hydraulic cooler. This assembly filters all of the
oil supplied in the auxiliary pump circuit. The filter is a 'spin-
on' type of filter. The filter is removed by turning the filter
body counterclockwise until it is free from the filter housing.
This filter will require periodic service and replacement.
OPERATION
REPLACEMENT PARTS
ELECTRIC SOLENOID HyDRAuLIC CONTROL vALvES
Electric Solenoid valve
Page # 47
READ complete manual CAREFULLY
BEFORE attempting operation.