SAC 3600 Series Operator's Manual page 21

CONTROLS
Figure 2 shows the operation screen upon start up with no system errors. The left side of the display screen from
top to bottom show Truck Hours, Manual or Remote Mode, High Speed Cleanout Mode, and Home Screen. The
right side of the display screen from top to bottom shows Day/Night Mode, Camera 1, Camera 2, and Camera 3.
The center of the display screen shows (from left to right) Front Auger System PSI, Front Auger Charge PSI,
Conveyor Speed %, Rear Auger Charge PSI, and Rear Auger System PSI. Hydraulic Oil Temperature is shown at the
top of the display in the center and Front and Rear Auger Speed is shown at the bottom of the display.
Figure 2
READ complete manual CAREFULLY
OPERATION
Page # 21
BEFORE attempting operation.
REPLACEMENT PARTS