Table of Contents
Advertisement
REPLACE DRIVE BELT
Check the condition of the drive belt regularly. If you discover a crack or if it is worn, the drive
belt must be replaced immediately.
1. Lift the container and insert a support rod for safety reasons.
2. Lift the machine and place it on blocks or
a pallet, which can bear the weight of the
machine.
The tracks must be at least 10 cm above
the ground.
3. Adjust the bolt, M20x180, to move the guide wheel unit towards the drive wheels. The drive
belt loosens.
4. Pull out the loosened drive belts.
WARNING! Risk of crushing!
When removing or installing the
drive belts, be careful not to get
your fingers caught between
the drive belt and the pulley.
Table of contents
Use blocks or pallets.
25
Advertisement
Table of Contents
