Table of Contents
Advertisement
3. Adjust the tension on the drive belts by releasing the bolt (M20x180) and moving forward or
backward, see arrow. Lock the bolts after the adjustment is complete.
NOTE It is important to remember that adjustments are individual, i.e. adjustment must be
made on both the right and left-hand sides of the minidumper.
Warning! Do not over-tighten the drive belt. The harder you tighten the drive belt, the less
effective the braking effect will be.
NOTE: If there is no margin for adjustments with the adjusting bolt, the drive belt may need
to be replaced.
24
Stop the engine before starting service/inspection/repairs - risk of injury!
Let the engine cool before starting service/inspection/repairs - risk of burns!
WARNING!
Table of contents
Advertisement
Table of Contents
