Kellfri 27-MD500 Operating Instructions Manual page 27

Minidumper
Table of Contents

Advertisement

STEERING ADJUSTMENT 2
If previous setting does not
provide sufficient cable ten-
sion, followthe steps below:
1. Loosen the awl nut,
see Figure 1.
2. Tighten or loosen the cable
by adjusting the adjustment
nut, see Figure 2.
3. When you have the correct
cable tension, tighten the awl
nut to hold the cable in place,
see Figure 3.
Table of contents
Adjustment
nut
Awl nut
Locking nut
2.
Adjustment nut
WARNING
Maintenance of the air filter
Clean the filter with a detergent every 50 hours.
When the machine is used in dusty
environments, clean the filter every 10 hours.
Once the filter has dried, dip it in oil and
remove excess oil before using.
1.
Locking nut
3.
Locking nut
To avoid damaging the engine,
fill with oil, 15W-40, to the
indicated level in the air filter.
Awl nut
Awl nut
27

Advertisement

Table of Contents
loading

Table of Contents