Table of Contents
Advertisement
CHECK AND TIGHTEN THE BELTS AT REGULAR INTERVALS. A NEW MACHINE SHOULD
BE CHECKED AND THE BELTS TIGHTENED AFTER 2 HOURS OF OPERATION.
BELT ADJUSTMENT
CHECK BELT TENSION REGULARLY
The belt should move 20 mm (10 mm on each side) under pressure.
GEARBOX
LEVEL PLUG
DRAINAGE PLUG
Table of Contents
Remove protective covers and adjust adjustment bolts.
PROTECTIVE COVER
ADJUSTMENT BOLT
NB 2
REFILLING WITH OIL -
TRANSMISSION OIL 80W-90 (1.2 L)
21
Advertisement
Table of Contents
