Table of Contents
Advertisement
TOPPING UP/DRAINING HYDRAULIC OIL
Release the locking hook and tilt the bed using the lever.
Do not forget to lock the lever in place with the locking hook when the floor is back in its
normal position.
Top up with hydraulic oil.
Draining hydraulic oil.
Table of contents
1. Ensure that the tap screw is tight.
2. Unscrew the oil level screw.
3. Fill with hydraulic oil via a funnel.
Capacity 3.5 litres – 10W AW32
4. Screw the oil level screw back on.
1. Make sure the unit is on level ground
2. Place a catch pan under the tap screw.
3. Unscrew the tap screw and drain off the oil.
4. Screw the tap screw back into place.
19
Advertisement
Table of Contents
