Table of Contents
Advertisement
12
SERVICE WORK ON THE CHASSIS
12.29
Installing the main silencer
12.30
Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Info
Over time, the fibers of the glass fiber yarn filling escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
Main work
–
Mount the main silencer with rubber sleeve
–
Mount and tighten screws
Guideline
Remaining screws, chassis
L02628-10
Finishing work
–
Install the right side cover. (
Preparatory work
–
Remove the right side cover. (
–
Remove the main silencer. (
Main work
–
Remove screws
–
Pull the glass fiber yarn filling
–
Clean the parts that are to be reinstalled.
–
Mount the new glass fiber yarn filling
–
Slide outer tube
–
Mount and tighten all screws
B00486-10
Finishing work
–
Install the main silencer. (
–
Install the right side cover. (
.
M6
p. 56)
p. 56)
p. 54)
. Pull out inner tube
.
from the inner tube.
on the inner tube.
over the inner tube with the new glass fiber yarn filling.
.
p. 55)
p. 56)
.
10 Nm (7.4 lbf ft)
55
Advertisement
Table of Contents
