12 SERVICE WORK ON THE CHASSIS
12.28
12.29
70
Installing the main silencer
S02101-10
F03475-11
Changing the glass fiber yarn filling in the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn filling escape and the damper "burns" out.
Not only is the noise level higher, but the performance characteristics change.
Main work
–
Position the catalytic converter in the main silencer.
–
Position the main silencer.
–
1
Mount screws
, but do not tighten yet.
–
2
Attach spring
.
Spring hook (50305017000C1)
–
1
Tighten screws
.
Guideline
Remaining screws,
chassis
Finishing work
–
Install the right side cover. (
–
Mount the seat. (
p. 65)
–
Install the air filter box cover. (
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. (
p. 64)
–
Remove the right side cover. (
–
Remove main silencer. (
M6
10 Nm (7.4 lbf ft)
p. 69)
p. 66)
p. 66)
p. 68)
p. 69)