Removing The Start Number Plate; Installing The Start Number Plate - Husqvarna FS 450 2019 Repair Manual

Removing the start number �late
13.4 Installing the start number �late
O.
-
Remove screw Swivel the start number plate to one side.
8
-
Remove screw and take off the brake line guide and start
number plate.
-
Position the brake line and brake line guide on the start num­
ber plate.
Mount and tighten screw
-
Position the start number plate.
✓ The holding lugs engage in the fender.
-
Mount and tighten screw
Guideline
Remaining screws,
chassis
MASK, FENDER 13
O.
8.
M6 10 Nm (7.4 lbf ft)
...
...
115