Husqvarna FS 450 2019 Repair Manual page 280

22 CYLINDER HEAD
278
' --•
•
-=
- -- --- - -1--
(D
-
Position the rocker arm
✓ The rocker arm shaft with lubrication bore
on the intake side.
✓ The cut-outs G) face upward.
Info
Make sure that the tapped hole of the rocker arm shaft
is facing outward.
@)
Align drill holes
0
holes in the cylinder head,
-
Remove appropriate screw M6,
-
Mount and tighten screws
Guideline
Screw, rocker arm
bearing
-
Position camshaft retaining bracket
-
Mount and tighten screws
Guideline
Screw, camshaft
retaining bracket
Finishing work
-
Check the valve clearance.
-
Remove the motorcycle from the lift stand.
-
Install the fuel tank, (8 p, 102)
-
Install the right side cover.
-
Mount the seat (8 p, 1 00)
-
Install the air filter box cover.
and mount rocker arm shafts
6)
is installed
in the rocker arm shafts with drill
8.
M7 15 Nm (11.1 lbf ft)
8-
0-
M7x1 15 Nm (11 .1 lbf ft)
(8 p, 274)
(8 p. 12)
(8 p, 99)
(@:!l p. 95)
0.