Husqvarna FS 450 2019 Repair Manual page 147

O
Remove screws with washers
Press back the brake linings by slightly tilting the brake
caliper laterally on the brake disc. Pull the brake caliper
carefully back from the brake disc and hang to the side.
Info
Do not operate the hand brake lever if the brake
caliper has been removed.
Move the brake reservoir mounted on the handlebar to a hori­
zontal position.
8.
Remove screws
8
Take off cover with membrane
Press the brake piston back into the basic position and
ensure that brake fluid does not flow out of the brake fluid
reservoir; extract some if necessary.
Press together brake linings (D and remove them from the
brake caliper.
Clean the brake caliper and spring plate.
Ensure that the spring plate is correctly positioned.
Info
The arrow on the spring plate points in the direction of
rotation of the brake disc.
Position the new brake linings (D in the guides and press
toward the pistons.
✓ The spring plate is seated correctly in the brake caliper.
Info
Always change the brake linings in pairs.
BRAKE SYSTEM 16
8.
0.
145