Husqvarna FS 450 2019 Repair Manual page 170

17 ENGINE
168
Route the cable without tension and secure with cable clips
and cable ties.
Position the engine braces.
Mount and tighten screws �.
Guideline
Screw, engine M8
brace
O.
- Tighten screws
Guideline
Engine carrying
screw
Remove the locking piece and position the subframe.
Info
Watch out for the intake flange.
Mount and tighten screw •.
Guideline
Screw, sub­ M8
frame
Remove screw �.
Mount and tighten screw�-
25 Nm (18.4 lbf ft)
Loctite ®
M10 60 Nm (44.3 lbf ft)
30 Nm (22.1 lbf ft)
®
Loctite
2701
TM
2701 TM