Cisco Gigabit Switch Router 12008 Installation And Configuration Manual page 351

Step 2
Step 3
Figure 7-24
2
1
Installation screws
ESD socket
Removing and Replacing the Cable Management System
Once the interface cables are removed from the cable-management tray, position
the interface cables out of the way in preparation for removal of the cable-
management tray.
Remove the four installation screws securing the cable-management tray to the
recessed router enclosure (see Figure 7-24). Save the screws for possible future
use.
Removing the Cable-Management Tray from the Cisco 12008
3
Maintaining the Cisco 12008 7-71